MC33883HEG H-Bridge Gate Driver IC.

The 33883 is an H-bridge gate driver (also known as a full-bridge pre-driver) IC with integrated charge pump and independent high and low side gate driver channels. The gate driver channels are independently controlled by four separate input pins, thus allowing the device to be optionally configured as two independent high side gate drivers and two independent low side gate drivers. The low side channels are referenced to ground. The high side channels are floating.

The gate driver outputs can source and sink up to 1.0 A peak current pulses, permitting large gate-charge MOSFETs to be driven and/or high pulse- width modulation (PWM) frequencies to be utilized. A linear regulator is incorporated, providing a 15 V typical gate supply to the low side gate drivers. The 33883 is AEC-Q100 qualified.

Features :

• VCC operating voltage range from 5.5 V up to 55 V
• VCC2 operating voltage range from 5.5 V up to 28 V
• CMOS / LSTTL compatible I / O
• 1.0 A peak gate driver current
• Built-in high side charge pump
• Under-voltage lockout (UVLO)
• Over-voltage lockout (OVLO)
• Global enable with <10 µA Sleep mode
• Supports PWM up to 100 kHz
• Qualified in compliance with AEC-Q100 

Applications :

• Automotive: 12 V to high-voltage battery packs
• E-bikes, e-scooters
• Energy Storage Systems (ESS)
• Uninterruptible Power Supply (UPS)
• Battery junction box
• Part number: MC33883HEG

MC33883HEG Pinout diagram :

Malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

 Download MC33883HEG IC Datasheet pdf